Docs Self-Managed Manage Security Configure Authentication This is documentation for Self-Managed v24.2. To view the latest available version of the docs, see v24.3. Configure Authentication Authentication verifies the identity of users and applications that connect to Redpanda clusters. Different Redpanda APIs support different authentication methods. You can configure multiple listeners for each API, and you can configure each listener with an authentication method. Redpanda APIs support these authentication methods: API Supported Authentication Methods Kafka API SASL SASL/SCRAM SASL/OAUTHBEARER (OIDC) SASL/GSSAPI (Kerberos) mTLS Admin API Basic authentication OIDC HTTP Proxy (PandaProxy) Basic authentication OIDC Schema Registry Basic authentication OIDC Enable authentication To enable authentication in Redpanda, you must: Create at least one superuser. Enable SASL authentication. Create superusers Before enabling authorization in Redpanda, which can happen implicitly when you enable authentication, you must create a superuser. A superuser is a special user that has all permissions on the cluster. They can grant permissions to other users through access control lists (ACLs). Without a superuser, you can create other users, but you can’t grant them permissions to the cluster. Enabling authorization without a superuser can result in being locked out of the cluster, as you would not have the necessary permissions to manage the cluster’s settings or users. A superuser can either be a SCRAM user or it can be provided by external authentication mechanisms, such as OIDC. However, rpk can only communicate with the Admin API using HTTP basic authentication, which requires a SCRAM user. This means that for administrative tasks executed through rpk, you must have a SCRAM user with superuser privileges. Specify the username of a superuser. rpk cluster config set superusers ['<superuser-username>'] This can be a new user or an existing user. For example, if you use the superuser named admin, then Redpanda allows the admin user to do anything, but Redpanda does not create the admin user. Create a SCRAM superuser: rpk security user create <superuser-username> \ -p '<superuser-password>' \ --mechanism=<superuser-authentication-mechanism> \ -X admin.hosts=localhost:9644 Replace <superuser-authentication-mechanism> with a SCRAM authentication mechanism. Valid values are SCRAM-SHA-256 or SCRAM-SHA-512. The Admin API defaults to localhost:9644. If you’ve configured the Admin API to use a different address/port, use the -X admin.hosts=<address:port> flag. Now this user has full access to the cluster and can grant permissions to other users. For information about using rpk to manage ACL users, see rpk security acl. As a security best practice: Don’t use the superuser to interact with the cluster. Don’t delete the superuser (in case you need to grant permissions to new users later). When you create the superuser, you specify a password, which adds a level of security. If you delete the user, someone else could re-create the user with a different password. Edit superusers To edit a superuser, use the following command to apply the new value: rpk cluster config edit Enable SASL authentication To enable authentication in your Redpanda cluster, you have the following options, depending on your requirements for SASL authentication and authorization. You must create at least one superuser before enabling authentication. Enabling authentication without a superuser can result in being locked out of the cluster. Enable SASL authentication for all Kafka listeners: Use this method if you haven’t already enabled authentication and you want to apply SASL authentication to all Kafka listeners. This approach does not require you to restart the cluster. This command implicitly enables authorization. If you want to disable authorization, you can use the kafka_enable_authorization cluster configuration property. rpk cluster config set enable_sasl true Explicitly enable authorization and define authentication method per listener: Choose this method if you require specific control over the authentication method for each Kafka listener, or if you need to enable authorization explicitly. This option requires a cluster restart. Enable authorization: rpk cluster config set kafka_enable_authorization true Define the authentication method for each listener. See Authentication for the Kafka API and Authentication for the HTTP APIs. For detailed information about these and other cluster configurations, see Configure Cluster Properties. Authentication for the Kafka API Redpanda supports the following authentication methods for the Kafka API: SASL (Simple Authentication and Security Layer) mTLS (Mutual Transport Layer Security) SASL SASL provides a flexible and adaptable framework for implementing various authentication mechanisms. Redpanda supports these SASL mechanisms: SASL/SCRAM SASL/OAUTHBEARER (OpenID Connect, also known as OIDC) SASL/GSSAPI (Kerberos) Enable SASL To enable SASL authentication for the Kafka API, set the authentication_method property of the Kafka listeners to sasl. If you enabled authentication with enable_sasl=true, Redpanda implicitly sets authentication_method to sasl for the Kafka listeners. If you enabled authentication with kafka_enable_authorization=true, you must enable SASL for the Kafka listeners. In redpanda.yaml, enter: redpanda: kafka_api: - address: 0.0.0.0 port: 9092 name: sasl_listener authentication_method: sasl Enable SASL with TLS encryption SASL provides authentication, but not encryption. To provide encryption, you can enable TLS in addition to SASL. See Configure Kafka TLS Encryption. For example, to enable SASL authentication with TLS encryption for the Kafka API, in redpanda.yaml, enter: redpanda: kafka_api: - address: 0.0.0.0 port: 9092 name: sasl_tls_listener authentication_method: sasl kafka_api_tls: - name: sasl_tls_listener key_file: broker.key cert_file: broker.crt truststore_file: ca.crt crl_file: ca.crl # Optional enabled: true require_client_auth: false SASL/SCRAM SASL/SCRAM does not require sending passwords over the network, even in an encrypted form. It uses a challenge-response mechanism, ensuring that the password is not directly accessible to the server. It works with hashed passwords, providing additional security against dictionary attacks. Enable SASL/SCRAM SASL/SCRAM is enabled by default. To check if SASL/SCRAM is enabled: rpk cluster config get sasl_mechanisms You should see SCRAM in the output. If SASL/SCRAM is not enabled, enable it by appending SCRAM to the list of SASL mechanisms: rpk cluster config set sasl_mechanisms '["SCRAM"]' Create SCRAM users When you have SASL authentication enabled for your Redpanda cluster, you can create SCRAM users. Redpanda supports the following SASL/SCRAM authentication mechanisms for the Kafka API: SCRAM-SHA-256 SCRAM-SHA-512 By default, SCRAM users don’t have any permissions in the cluster. Only superusers can grant permissions to new users through ACLs. To create the SCRAM user <my-user> with a password <change-this-password>, run rpk security user create: rpk security user create <my-user> \ -p '<change-this-password>' \ --mechanism SCRAM-SHA-256 Enclose passwords in single quotes to avoid conflicts with special characters. Enclosing characters in single quotes preserves the literal value of each character. Use the rpk security acl create command to grant create and describe permissions to myuser in the cluster: rpk security acl create --allow-principal User:myuser \ --operation create,describe \ --cluster \ -X user=<superuser-name> \ -X pass='<superuser-password>' \ -X sasl.mechanism=<superuser-authentication-mechanism> Grant the new user describe privileges for a topic called myfirsttopic: rpk security acl create --allow-principal User:myuser \ --operation describe \ --topic myfirsttopic \ -X user=<superuser-name> \ -X pass='<superuser-password>' \ -X sasl.mechanism=<superuser-authentication-mechanism> You must grant privileges for specific topics. Even if a user has describe privileges for a cluster, it does not mean that the user is granted describe privileges for topics. See also: User create. Connect to Redpanda This section provides examples of connecting to Redpanda as a SCRAM user when SASL/SCRAM authentication is enabled. Create a topic as the myuser user by running rpk topic create: rpk topic create myfirsttopic \ -X user=myuser \ -X pass='changethispassword' \ -X sasl.mechanism=SCRAM-SHA-256 To describe the topic, run rpk topic describe: rpk topic describe myfirsttopic \ -X user=myuser \ -X pass='changethispassword' \ -X sasl.mechanism=SCRAM-SHA-256 Configure Schema Registry and HTTP Proxy to connect to Redpanda with SASL Schema Registry and HTTP Proxy connect to Redpanda over the Kafka API. For the Kafka username and password, Redpanda uses ephemeral credentials internal to the cluster. Ephemeral credentials are regular SCRAM credentials, but they’re only stored in memory and are lost when a broker restarts. When the Schema Registry or HTTP Proxy start up, they broadcast an ephemeral credential to other brokers over the internal RPC. If authentication fails to a particular broker, new ephemeral credentials are sent to that broker, and the service reconnects. Schema Registry and HTTP Proxy support only the SASL/SCRAM mechanism. You can override the ephemeral credentials and manually configure Schema Registry and HTTP Proxy to connect to Redpanda with SASL. This approach is particularly useful when you want to apply specific access control through ACLs for the Schema Registry and HTTP Proxy users. Create appropriate ACLs for the Schema Registry and HTTP Proxy users to define and restrict their access rights within the Redpanda cluster. Configure the listeners: For Schema Registry: schema_registry_client: brokers: - address: 127.0.0.1 port: 9092 scram_username: <username> scram_password: <password> sasl_mechanism: SCRAM-SHA-256 If TLS is enabled, additional configuration is required: schema_registry_client: brokers: - address: 127.0.0.1 port: 9092 broker_tls: key_file: broker.key cert_file: broker.crt truststore_file: ca.crt crl_file: ca.crl # Optional enabled: true scram_username: <username> scram_password: <password> sasl_mechanism: SCRAM-SHA-256 For HTTP Proxy: pandaproxy_client: brokers: - address: 127.0.0.1 port: 9092 broker_tls: key_file: broker.key cert_file: broker.crt truststore_file: ca.crt crl_file: ca.crl # Optional enabled: true scram_username: <username> scram_password: <password> sasl_mechanism: SCRAM-SHA-256 OAUTHBEARER (OIDC) OpenID Connect (OIDC) authentication requires an Enterprise license. To upgrade, contact Redpanda sales. When you enable OIDC, Redpanda and Redpanda Console can delegate the authentication process to an external identity provider (IdP) such as Okta, Azure AD, or on-premise Active Directory Federation Service (AD FS). With OIDC enabled, Redpanda does not need to manage user credentials directly, but can instead rely on the trusted authentication capabilities of established IdPs. Redpanda’s implementation of OIDC provides SASL/OAUTHBEARER support for the Kafka API, and supports standard OIDC authentication across all other HTTP APIs, including Schema Registry, HTTP Proxy, and the Admin API. OIDC is not supported by rpk or Redpanda Cloud. While rpk does not support OIDC, it does support configuring Redpanda with OIDC as a SASL mechanism. OIDC credentials flow and access token validation Before configuring OIDC, you should understand the credentials flow, and in particular, the validation claims included in the access token, as you will need to provide them in the OIDC configuration. Redpanda’s implementation of OIDC adheres to the client credentials flow defined in OAuth 2.0 RFC 6749, section 4.4 in which a client obtains an access token from the authorization server, and provides this access token to Redpanda, either using SASL/OAUTHBEARER for the Kafka API, or an HTTP Authorization (Bearer) header. The access token is a bearer token. A bearer token is used for authentication and authorization in web applications and APIs, and holds user credentials, usually in the form of random strings of characters. Bearer tokens are generated based on protocols and specifications such as JWT (JSON Web Token), which has a header, payload, and signature. The signature must be verified according to the JWK. Claims inside the token and the token signature must both be validated. After validation, a configurable claim from the token payload is extracted as the principal and attached to the connection, as with any other authentication method. Following is an example JWT header: { "alg": "RS256", "typ": "JWT", "kid": "tMQzailSAdaW4nojXxES9" } Following is an example JWT payload: { "iss": "https://dev-ltxchcls4igzho78.us.auth0.com/", "sub": "3JJeI4tmMC6v8mCVCSDnAGVf2vrnJ0BT@clients", "aud": "localhost", "iat": 1694430088, "exp": 1694516488, "azp": "3JJeI4tmMC6v8mCVCSDnAGVf2vrnJ0BT", "scope": "email2", "gty": "client-credentials" } Following are additional validation claims (JWT properties) that are included in the access token: alg: The signature algorithm. The extension point in the JWT header is the signature algorithm used to sign the token, and cannot contain the value none. aud: Audience. Must match the configuration specified in oidc_token_audience. Cannot contain the value none. kid: Key identifier. Must match any of the public JWK listed in the jwks_uri endpoint. exp: Expiration. The timestamp listed is greater than current time. Must validate within acceptable bounds of the value specified in oidc_clock_skew_tolerance. A clock skew tolerance period may be configured by an Admin to account for clock drift between Redpanda and the OIDC Identity Provider (IdP). iss: Issuer. Must exactly match the issuer property of the JSON returned from the URL specified in oidc_discovery_url. scope: Scope. Must include the value openid. sub: Subject. This default claim identifies the principal subject. While sub is the default mapping ($.sub) in Redpanda, any claim within the JWT can be mapped to a Redpanda principal. Enable OIDC Register a client application with your IdP. A client application, in this context, refers to any application or service that will authenticate against the Redpanda cluster using OIDC. This registration process involves creating a new entry in the IdP’s management console for the application, sometimes called a client. During this process, you’ll specify details about your application, such as the type of application, the callback URLs, and any other required information as per your IdP’s requirements. In an enterprise environment, OIDC integration typically requires coordination with your organization’s security team. Enable SASL authentication if it’s not already enabled. Configure ACLs for your users so they can access Redpanda resources. Enable the OAUTHBEARER SASL mechanism: rpk cluster config set sasl_mechanisms '["SCRAM","OAUTHBEARER"]' -X admin.hosts=localhost:9644 Example output: Successfully updated configuration. New configuration version is 16. Specify the discovery URL of your identity provider (IdP). The following IdP URL uses the default value: rpk cluster config set oidc_discovery_url 'https://auth.prd.cloud.redpanda.com/.well-known/openid-configuration' Specify the intended audience of the token: rpk cluster config set oidc_token_audience 'redpanda' Specify the principal mapping, which is a JSON path that extracts a principal from any claim in the bearer token payload. The mapping rules are as follows: rule = "$" segments [ mapping ] segments = "." fieldname { "." fieldname } mapping = "/" regex_pattern "/" replacement_pattern "/" [ case_modifier ] replacement_pattern = replacement_element { replacement_element } replacement_match = "$" digit replacement_element = replacement_match | arbitrary_text case_modifier = "L" | "U" For example, consider a JWT with the following claims: { "sub": "user", "user_info": { "name": "User", "email": "user@example.com" } } Default rule ($.sub): Extracts the sub claim, resulting in the principal user. Extract principal from the email field ($.user_info.email/([^@]+)@.*/$1/L): This rule captures the username part of the email before the @ symbol and converts it to lowercase. The resulting principal is user. Extract principal with domain validation ($.user_info.email/([^@]+)@example.com/$1/L): This rule is similar to the previous one but only applies if the email domain matches example.com. The resulting principal is user if the domain matches, otherwise, the mapping fails. To apply a principal mapping rule in Redpanda, use the following command: rpk cluster config set oidc_principal_mapping '$.sub' rpk cluster config set oidc_principal_mapping '$.user_info.email/([^@]+)@.*/$1/L' Specify the amount of time (in seconds) to allow for when validating the expiration claim in the token: rpk cluster config set oidc_clock_skew_tolerance 30 Enable OIDC to disconnect clients when their token expires: rpk cluster config set oidc_token_expire_disconnect true Specify the amount of time keys from the jwks_uri are cached: rpk cluster config set oidc_keys_refresh_interval 3600 GSSAPI (Kerberos) Kerberos authentication requires an Enterprise license. To upgrade, contact Redpanda sales. To configure Kerberos authentication, use a keytab, which contains credentials for the service. Prepare the cluster: Ensure that host names are fully qualified domain names (FQDN). Ensure that each broker has a Kerberos configuration file (krb5.conf) set to use Active Directory or another corporate key distribution center (KDC). The default is at /etc/krb5.conf. Ensure that the KDC has a valid Kerberos service principal name (SPN) for each broker in the form primary/<FQDN>@<REALM>. Ensure that each broker has a keytab containing the SPN for that broker. This must be located at an identical file path on each Redpanda broker. The dfault is /var/lib/redpanda/redpanda.keytab. Enable SASL authentication if it’s not already enabled. Configure ACLs for your users so they can access Redpanda resources. If the keytab is not in the default location, then set its location: rpk cluster config set sasl_kerberos_keytab <path> If the krb5.conf file is not in the default location, then set its location: rpk cluster config set sasl_kerberos_config <path> Define the primary of the Kerberos SPN to be used by Redpanda with the given keytab. Default is redpanda. rpk cluster config set sasl_kerberos_principal <name> Set sasl_kerberos_principal_mapping. This maps Kerberos user principal names (UPNs) onto Redpanda principals used in the ACLs. For example: rpk cluster config set sasl_kerberos_principal_mapping '["RULE:[1:$1@$0](.*@MYDOMAIN.COM)s/@.*//","DEFAULT"]' By default, Redpanda matches the primary of the Kerberos UPN of the user. Each rule has the following format: RULE:[n:string](regexp)s/pattern/replacement/g/c where: n is an integer that indicates how many components the target principal should have. If this matches, then a string is formed from string, substituting the realm of the principal for $0 and the n`’th component of the principal for `$n. (For example, if the principal is johndoe/admin@realm.com, then [2:$2$1foo] results in the string adminjohndoefoo.) If this string matches regexp, then the s//[g] substitution command is run over the string. g is optional. It causes the substitution to be global over the string, instead of replacing only the first match in the string. c is optional. It can be either /L or /U to make the match lowercase or uppercase. DEFAULT The principal name is used as the local user name. If the principal has more than one component or is not in the default realm, then the conversion fails. Examples of a Kerberos UPN without a host (jdoe@EXAMPLE.COM) and with a host (jdoe/host@EXAMPLE.COM): Translation jdoe@EXAMPLE.COM jdoe/host@EXAMPLE.COM [1:$1@$0] jdoe@EXAMPLE.COM Rule does not match because there are two components in the principal name jdoe/host@EXAMPLE.COM. [1:$1] jdoe Rule does not match because there are two components in the principal name jdoe/host@EXAMPLE.COM. [1:$1.foo] jdoe.foo Rule does not match because there are two components in the principal name jdoe/host@EXAMPLE.COM. [2:$1/$2@$0] Rule does not match because there is one component in the principal name jdoe@EXAMPLE.COM. jdoe/host@EXAMPLE.COM [2:$1/$2] Rule does not match because there is one component in the principal name jdoe@EXAMPLE.COM. jdoe/host [2:$1@$0] Rule does not match because there is one component in the principal name jdoe@EXAMPLE.COM. jdoe@EXAMPLE.COM [2:$1] Rule does not match because there is one component in the principal name jdoe@EXAMPLE.COM. jdoe DEFAULT jdoe jdoe The first rule that matches is used to extract a principal. Append the list of allowed SASL mechanisms that clients can use to authenticate against the Kafka API. To get the list of all allowed SASL mechanisms, run: rpk cluster config get sasl_mechanisms To add support for Kerberos, append the sasl_mechanisms property with the value GSSAPI: rpk cluster config set sasl_mechanisms '["SCRAM","GSSAPI"]' For Kerberos authentication, Redpanda requires that SASL/SCRAM be enabled so that rpk, Redpanda Console, and other Redpanda products can connect to the cluster. Operating with Kerberos only is not a supported configuration. mTLS When mTLS is enabled, both the client and the server authenticate each other using TLS certificates. When mTLS authentication is enabled, Redpanda uses configurable rules to extract the principal from the Distinguished Name (DN) of an mTLS (X.509) certificate. It uses the principal as the identity or user name. To enable mTLS authentication, set authentication_method for a listener to mtls_identity. For example, to enable mTLS authentication for the internal Kafka API listener, in redpanda.yaml, enter: redpanda: kafka_api: - address: 0.0.0.0 port: 9092 name: mtls_listener authentication_method: mtls_identity kafka_api_tls: - name: mtls_listener key_file: mtls_broker.key cert_file: mtls_broker.crt truststore_file: mtls_ca.crt enabled: true require_client_auth: true By default, Redpanda matches the entire DN. To override the default, specify kafka_mtls_principal_mapping_rules. This is a list of rules that provide a mapping from DN to principal. Each rule has the following format: RULE:pattern/replacement/[LU]. Where: pattern is a regular expression. For example, to extract the CN field: .*CN=([^,]).*+. replace is used to adjust the match. For example, to use just the first match, use: $1. L makes the match lowercase (optional). U makes the match uppercase (optional). For example, with the DN: CN=www.redpanda.com,O=Redpanda,OU=Engineering,L=London,S=England,C=UK Rule Principal RULE:.*CN=([^,]+).*/$1/ www.redpanda.com RULE:.*O=([^,]+).*/$1/ Redpanda RULE:.*O=([^,]+).*/$1/L redpanda RULE:.*O=([^,]+),OU=([^,]+),.*,C=([^,]+)/$1-$2-$3/L redpanda-engineering-uk DEFAULT CN=www.redpanda.com,O=Redpanda,OU=Engineering,L=London,S=England,C=UK The first rule that matches is used to extract a principal. To update the kafka_mtls_principal_mapping_rules property: rpk cluster config set kafka_mtls_principal_mapping_rules '["DEFAULT"]' Configure Schema Registry and HTTP Proxy to connect to Redpanda with mTLS Schema Registry and HTTP Proxy require valid client certificates to secure the connection to Redpanda. Continuing with the previous example, where the certificate contains an identity for authentication (kafka_api listener set to mtls_identity), the following example shows how to connect Schema Registry and HTTP Proxy to Redpanda with mTLS certificate-based identity. For example: schema_registry_client: brokers: - address: 127.0.0.1 port: 9092 broker_tls: key_file: schema_registry.key cert_file: schema_registry.crt truststore_file: ca.crt enabled: true pandaproxy_client: brokers: - address: 127.0.0.1 port: 9092 broker_tls: key_file: pandaproxy.key cert_file: pandaproxy.crt truststore_file: ca.crt enabled: true Authentication for the HTTP APIs The following HTTP APIs support basic authentication and OIDC authentication: Admin API Schema Registry HTTP Proxy Basic authentication Basic authentication provides a method for securing HTTP endpoints. With basic authentication enabled, HTTP user agents, such as web browsers, must provide a username and password when making a request. Before you can enable basic authentication for these HTTP APIs, you must enable SASL authentication for the Kafka API. Then, both SCRAM users and superusers can use their credentials to access them: HTTP Proxy: Access to the Kafka API impersonates the user whose credentials were used to authenticate to HTTP Proxy, and the user is subject to authorization restrictions by Redpanda ACLs. To support this design, Redpanda passes the username/password in memory to a SASL-enabled Kafka client. Schema Registry: Authorization is "all or nothing": if the user presents a valid user account, then they have full read/write access. To add users to the Redpanda credential store that HTTP basic authentication uses, create users with rpk security user create. To enable basic authentication for the Admin API: create a SCRAM superuser so that you can use rpk to create ACLs. rpk supports only basic authentication for the Admin API. Enable authentication for the Admin API: rpk cluster config set admin_api_require_auth true Enable basic authentication: rpk cluster config set http_authentication '["BASIC"]' To enable basic authentication for specific listeners, set authentication_method to http_basic. For example, in redpanda.yaml, enter: pandaproxy: pandaproxy_api: - address: "localhost" port: 8082 authentication_method: http_basic schema_registry: schema_registry_api: address: "localhost" port: 8081 authentication_method: http_basic Connect to the HTTP API To access the internal listener: curl http://localhost:8082/topics -u <username>:<password> -sS If TLS is enabled, specify the HTTPS protocol and pass the path to the ca.crt file: curl https://localhost:8082/topics --cacert <path-to-ca>/ca.crt -u <username>:<password> -sS If the broker’s certificate is signed by a well-known, trusted CA, and you’re confident about the integrity of your system’s CA trust store, you don’t need the --cacert flag. For all available endpoints, see HTTP Proxy API. Connect to the Schema Registry API To access the internal listener: curl http://localhost:8081/subjects -u <username>:<password> -sS If TLS is enabled, specify the HTTPS protocol and pass the path to the ca.crt file: curl https://localhost:8081/subjects --cacert <path-to-ca>/ca.crt -u <username>:<password> -sS If the broker’s certificate is signed by a well-known, trusted CA, and you’re confident about the integrity of your system’s CA trust store, you don’t need the --cacert flag. For all available endpoints, see Schema Registry API. OIDC You can configure the HTTP APIs to authenticate users with the OIDC bearer token. By using OIDC, you can centralize credentials and provide a password-free SSO experience. See Enable OIDC to configure the required OIDC cluster configuration properties before enabling OIDC for the HTTP APIs. You can configure OIDC without enabling it for the Kafka API. If you enable OIDC authentication for the Admin API, you must also create a SCRAM superuser so that you can use rpk to create ACLs. rpk supports only basic authentication for the Admin API. See Authentication for the HTTP APIs. To enable OIDC for the HTTP API listeners as well as basic authentication, include OIDC in the http_authentication cluster property list: rpk cluster config set http_authentication '["BASIC","OIDC"]' To enable OIDC for specific listeners, set authentication_method to http_basic. For example, in redpanda.yaml, enter: pandaproxy: pandaproxy_api: - address: "localhost" port: 8082 authentication_method: http_basic schema_registry: schema_registry_api: address: "localhost" port: 8081 authentication_method: http_basic Connect to the HTTP API To access the internal listener: curl http://localhost:8082/topics -H "Authorization: Bearer <bearer-token>" -sS If TLS is enabled, specify the HTTPS protocol and pass the path to the ca.crt file: curl https://localhost:8082/topics --cacert <path-to-ca>/ca.crt -H "Authorization: Bearer <bearer-token>" -sS If the broker’s certificate is signed by a well-known, trusted CA, and you’re confident about the integrity of your system’s CA trust store, you don’t need the --cacert flag. For all available endpoints, see HTTP Proxy API. Connect to the Schema Registry API To access the internal listener: curl http://localhost:8081/subjects -H "Authorization: Bearer <bearer-token>" -sS If TLS is enabled, specify the HTTPS protocol and pass the path to the ca.crt file: curl https://localhost:8081/subjects --cacert <path-to-ca>/ca.crt -H "Authorization: Bearer <bearer-token>" -sS If the broker’s certificate is signed by a well-known, trusted CA, and you’re confident about the integrity of your system’s CA trust store, you don’t need the --cacert flag. For all available endpoints, see Schema Registry API. Disable authentication To disable authentication for a listener, set authentication_method to none: pandaproxy: pandaproxy_api: - address: "localhost" port: 8082 authentication_method: none schema_registry: schema_registry_api: address: "localhost" port: 8081 authentication_method: none If authorization is enabled, connections to this listener use the anonymous user. To disable authentication on the Kafka API, run: rpk cluster config set enable_sasl false Or, set the authentication_method of the Kafka listeners to none: redpanda: kafka_api: - address: 0.0.0.0 port: 9092 name: sasl_listener authentication_method: none Next steps Redpanda Authorization Mechanisms Suggested reading rpk security acl Suggested labs Enable Plain Login Authentication for Redpanda ConsoleSearch all labs Back to top × Simple online edits For simple changes, such as fixing a typo, you can edit the content directly on GitHub. Edit on GitHub Or, open an issue to let us know about something that you want us to change. Open an issue Contribution guide For extensive content updates, or if you prefer to work locally, read our contribution guide . Was this helpful? thumb_up thumb_down group Ask in the community mail Share your feedback group_add Make a contribution Security Redpanda Authorization Mechanisms